The Vipp shelves are made of a 3 mm aluminium plate, which is stamped out and shaped into a U-shape, creating two shelf surfaces. The shelves are mounted with an invisible bracket, providing a floating impression 8 mm. from the wall. The fixating thumbscrews in brushed, stainless steel present a subtle detail. An indentation in the two surfaces of the shelves holds a washable silicone mat for protection of delicate items.
Powder-coated aluminium, finger screws in brushed steel, mat in silicone rubber.
230 (H) x 1000 (L) x 185 (D) mm.
Load per shelf maximum 30 kg
CARE INSTRUCTIONS FOR POWDER COATED SURFACES
Keep powder coated surfaces clean and dry. Use a lint-free cleaning cloth or a soft brush with warm water and a mild detergent. This applies to both smooth and rough surfaces.
For a more thorough cleaning remove rubber parts. Dry thoroughly before applying rubber parts again.
Tips for stains
- Use alcohol or glass cleaner to remove grease stains. Then follow the guide for maintenance above.
Lime stains on the black (rough) surface:
- Use mild descaler suitable for painted surfaces. Use a lint-free cleaning cloth. Rinse with clean water and finally dry the bin.
CARE OF STAINLESS STEEL
Keep stainless steel clean and dry. Stainless steel may be permanently stained if water / fat / cleaning products are not removed relatively quickly.
We recommend the use of a care product for stainless steel, to make the surface water and dirt repellent. This makes the daily cleaning with a damp lint-free cleaning cloth a lot easier.
If the above instructions are followed, the stainless steel surface remains beautiful for many years. Remember not to use chlorine / abrasive cleaners as this may damage the surface.
Tips for stains
- Use alcohol or glass cleaner to remove grease stains. Then follow the guide for regular maintenance above.
Lime stains and discoloration
- Lime stains on stainless steel can be removed with warm soapy water, a soft sponge and a lot of elbow grease. It is important only to use a soft sponge, or else you may damage the brushed structure of the steel surface.
Stubborn stains and rust
Stubborn stains and rust may be removed by careful cleaning with a light-abrasive cleaner suitable for stainless steel. Cleaning must follow the structure of the polished surface. Please note that this process can change the original polishing of the surface.
Rubber parts may be cleaned with a moist cloth or in the dishwasher. Apply silicone spray for better finish.
If you have any questions or concerns about our products or a purchase you have made, you are always welcome to contact Vipp costumer service on email at email@example.com or by phone at +45 45 88 88 00 (US customer service phone number is +1 917-580-2148).